Ag Tech

Camera-based MSA carcase grading primed for launch

Jon Condon, 06/02/2020

AFTER an exhaustive assessment process, provisional approval has been granted by the AusMeat Language and Standards Committee for the use of objective digital camera technology in performing Meat Standards Australia grading.

German-developed E+V quality grading camera. Click on image for a larger view

Teys Australia is set to be the first processor to implement the E+V camera-based MSA grading technology, at the company’s Wagga Wagga facility in NSW.

An implementation date is anticipated for early March, and a roll-out plan is in place to adopt the units at Beenleigh and other Teys processing sites later in 2020.

Two versions of the German-made E+V cameras – a chiller assessment format and a whole carcase version – have been under trial at Teys Wagga and Lakes Creek Rockhampton for the past two and a half years, with performance trials submitted for AusMeat standards approval last year. A repeated study will be conducted at Wagga at the end of March, to ensure the cameras are continuing to perform within required parameters.

The chiller assessment version of the E+V camera assesses MSA traits including meat colour, fat colour and both AusMeat and MSA marbling, at the quartered rib site. Work is still progressing on approval for the unit’s ability to assess eye-muscle area, which if successful, will eventually be employed with a separate whole-carcase E+V camera to define carcase yield.

It is only the rib-eye camera which has been approved by AusMeat for MSA grading use at this stage – specifically for assessment of meat and fat colour and marbling traits.

“The camera system is providing a better tool for graders to measure traits on which we pay MSA cattle suppliers,” Teys’ Tom Maguire said. “It’s about building consistency, confidence and trust in the process,” he said.

The introduction of camera-based MSA grading did not greatly reduce manual grader workload, because the grader still has to assess pH decline, temperature decline, evenness of carcase fat cover and in some cases, hump height on each carcase.

“What the camera does provide, however, is greater transparency with MSA cattle suppliers, and assured consistency in grading performance on the four traits described,” Mr Maguire said.

“As Teys moves progressively towards our long-term vision of value-based marketing, that trust along the supply chain is a critically important – and the new MSA grading camera helps reinforce that,” he said.

While current manual MSA graders working across the industry operate at a high-degree of proficiency, the fact is the process contains a ‘human factor’, and repeatability and consistency are important.

The new E+V cameras have been proven to be at least as repeatable as the best MSA manual graders in the country. The cameras have been ‘trained’ against an experienced MSA grader, regarded as the gold standard for consistency of grading performance in AusMeat.

Accredited MSA graders will continue to play a critical part in the assessment process, operating the E+V cameras as a tool to make routine grading judgements.

Under certain circumstances – such as a badly-quartered carcase, or where bone-dust or moisture is present on the quartered surface, potentially distorting the marbling or meat colour assessment  – the MSA grader will have the ability to over-ride the camera assessment, and perform the task manually.

Another important part of the process is that digital images of each camera-graded carcase will be retained, for potential dispute settlement.

At some future point, Teys plans to incorporate individual carcase images in producer carcase feedback information. That will require some IT development, perhaps using the Cloud for data storage. One of the simple challenges already identified is the wide colour variation that may be evident on different on-farm computer screens.

While Teys will initially use the E+V camera only on MSA-eligible carcases, the longer-term plan is to grade all carcases using the technology.

Allan Bloxsom

AusMeat chairman Allan Bloxsom said approval had now been completed for the E+V cameras to be used commercially in the industry, subject to several provisions, such as documentation of the use of the cameras in each plant’s QA systems. This would cover events such as what happens in the event of the need for ‘re-reads,’ and over-riding the camera results.

Agreement had been reached that only certified MSA graders would be eligible to operate the E+V cameras.

Mr Bloxsom said the data collected from the Teys trials was sufficient to mean that other operators could now use eligible cameras for MSA grading, without doing further trial work.

He said the technology could quite easily manage chain speeds typical in large Australian beef plants.

While other vision grading cameras were in voluntary use in the Australian meat industry, such as the Japanese Kuchida camera used in the Wagyu sector, the E+V camera was the only example to come forward for AusMeat grading approval at this stage, Mr Bloxsom said.

“It’s all systems go, so far as AusMeat is concerned, for the E+V camera. It’s likely other units will now come on line,” he said.

Similar E+V cameras have been used in the US beef industry for the past year or two, calibrated for USDA grading criteria. The US experience suggests that manual grading assessment is still required on some carcases, for a variety of reasons – especially in high-volume plants.

The Australian beef industry has a long history of interest in camera-based grading systems, most notably the pioneering Video Image Analysis (VIAScan) system developed, but never commercially implemented, by AMLC/MLA from the mid-1990s to early 2000s. A number of supply chains, including Woolworths, used VIAscan for carcase assessment and feedback, but never got to the stage of basing payments on digital images.

The current owners of the VIAScan technology, Cedar Creek, is also understood to be revamping its system, with a possible view to AusMeat approval for carcase grading.

 

 

 

 

Leave a Reply to Craig Daff Cancel Reply

Your email address will not be published. Required fields are marked *

Your comment will not appear until it has been moderated.
Contributions that contravene our Comments Policy will not be published.

Comments

  1. Raymond Cronin, 18/02/2020

    Hello Beef Central,
    Please provide contact information for MSA grading system. My name is Raymond Cronin and Managing Director for Pt Arsi Indo Graha company base in Indonesia and supplying products and services to the meat industry.
    Look forward to hearing from you
    Best regards Raymond Cronin

  2. Craig Daff, 11/02/2020

    Just to clarify and as David mentions. The VIAscan CAS (Chiller Assessment System) system was commercially used by Woolworths and the VIAscan data was used for supplier based payments. As the article also mentions Marel Cedar Creek has been working on a new version of the VIAscan CAS unit, remodelled into a much smaller compact hand held unit with upgraded technology. The new VIAscan CAS is in its final stages of development and will measure Meat Colour, Fat Colour, Marbling (including high end Wagyu), Eye Muscle Area and Total Rib Fat including calculations for a predicted yield. In recent times we have been running trials with ALMtech and local processors to refine results before approaching Ausmeat for accreditation (Including MSA).

  3. Michael Katz, 08/02/2020

    The Wagyu industry has been working on a camera for over 10 years. This is a Japanese version with amazing ability to grade marbling. Marbling is the gold standard for meat quality. Why has the MLA decided to support a German version of the camera rather than the well established Japanese version?

    Thanks for your comment, Michael. Following discussions last week, we don’t see any evidence of ‘MLA’ (or more accurately, AusMeat) supporting one camera system over another. Teys has chosen to use the E+V technology, and was the first to submit it to AusMeat for performance assessment against manual graders. There is nothing stopping the users of the Japanese Kuchida camera from submitting it for AusMeat grading use, if they so choose. We’ve been told that there could well be more than one camera system in use for grading in future, provided they meet AusMeat’s performance criteria. Our (somewhat limited) knowledge of the Kuchida camera is that it was developed specifically for measurement of abundant marbling found in Wagyu carcases. While it is apparently performing well in that role, with a number of units in use in Australia being used for private purposes (i.e. not AusMeat approved) it’s ability to measure much lower levels of marbling typically seen in MSA yearling type grass and grainfed carcases is still unproven. In fact it has not been designed for this purpose. Editor

  4. henry ramage, 07/02/2020

    All very well to get information but you are not thinking of me – the end user. Blind freddy could make a probe one pushed into the meat to tell if it was tender or not!!!!!!.Please do some research on this end.
    Henry Ramage

    Thanks for your comment, Henry. There’s already a well-accepted tenderness probe in use, as you describe, called the Warner-Bratzler shear force test. It can accurately measure tenderness on cuts of beef in laboratory/research settings, but is not suitable for whole carcases, or high-volume abattoir chain speeds. While we agree that tenderness is critically important, the E+V cameras described in the article are measuring other important MSA criteria – meat and fat colour, and marbling. Editor

  5. David Hopkins, 06/02/2020

    VIAScan was used in the lamb industry as a part of payment systems, but had a flawed adoption plan, hopefully with Teys etc driving this latest development it will persist!

Get Beef Central's news headlines emailed to you -
FREE!